Remote monitoring for cold rooms and commercial refrigeration
Stop driving out to check a compressor. Watch every client's cold room temperature in real time, and get an automatic alert — or an automatic command — the moment something goes wrong.
"The cold room's warm and I don't know why"
A compressor cycling wrong, a door left open, a sensor failing — by the time a client calls you, product is already at risk. MrSanmiguel IOT Portal watches every temperature reading in real time and can react before it becomes a service call.
Know before the client does
Set a threshold on any sensor — "if temperature rises above 4°C" — and the rules engine checks it every 3 seconds. No polling delay, no missed excursion.
Not just an alert — a real command
A rule doesn't have to just notify you. Point it at a backup compressor, a fan, a valve — anything wired to a device — and it fires the command automatically, before anyone picks up the phone.
Disconnection alerts, automatic
If a sensor goes quiet for more than 300 seconds — dead battery, lost signal, whatever — the client gets an email. A silent sensor is as dangerous as a bad reading.
Certificate-secured, not a shared password
Every sensor and controller connects with its own signed TLS certificate. Compromise one device, the rest of the client's site — and every other client's — stays untouched.
One panel, every client's cold rooms
Manage every client's sites from a single login. Each client sees only their own dashboards — you see all of them, from wherever you are.
90 days of raw data, for when you need proof
Full-resolution temperature history for 90 days — useful when a client asks how long a reading was actually out of range, after the fact.